Alu Alu Blister Packing Machine, also known as the Blister Sealing Machine, is a cGMP equipment that is intended for Cold Forming (ALU/ALU) blister packs with the possibility to have Thermon Forming (PVC/ALU) blister packs. It also includes pharmaceutical blister packing technology. Large production batches in the pharmaceutical business are appropriate for this machine. We have evolved with the future while utilizing the greatest concepts from the past. The equipment’s primary movements are pneumatic and mechanical, and all of the control systems employed are the best available on the electronic market.
One of the top producers of blister packaging machines in India, Adinath offers a wide selection of both single- and double-track blistering machines. These devices are used to package capsules and tablets in blisters. Other names for it include a capsule blister packer and a tablet blister packer.
Blister Packing Machine Video
Design Highlights of Blister Packaging Machine
The basic machine body made of mild steel chassis with SS 304 frames welded and bolted from a rigid frame device structure on which various modular stations are mounted in balcony design. All the drive component and extensive cabling are located behind and inside the machine the various stations of the machine are controlled by the centrally mounted spline shaft driven by Main motor. There are two servo motors for operating the Indexing and the feeding system of the machine. The Feeding is done by Product Transfer Roller (PTR) for Alu/Alu Blister accurately. The entire machine is mounted on the six height adjustable studs so that the entire area below the machine is easily sanitized. The machine will be properly guarded to ensure operator safety. The cantilevered modular stations adjustments are accessed from the front side of the machine. The format parts are very easy to mount and dismount and are achieved using minimum tools and tackles. A complete set of changeovers can be achieved in less than 30 minutes with minimum operator fatigue.
Salient Features of Alu Alu Blister Packing Machine
- Compact GMP model
- Production output up to 200000 tablets per shift.
- Calibrated speed up to 30 strokes per minute in 240mm format area.
- Servo based web indexing mechanism.
- Dropping system with pneumatic technology.
- Optional feature of Perforation and Embossing stations.
- User friendly HMI touch screen (Human machine interface).
- No micro stops.
- Vibration free rigid structure.
- Easy to clean design.
Technical Specification of Blister Packing Machine
|
DESCRIPTION
|
COLD FORMING ALU-ALU
|
THERMO FORMING (WHEN FITTED)
|
|
Base Film Width |
Alu. Foil 150 mm | PVC Film 150 mm |
| Film Thickness | Alu. 0.13-0.15 mm |
PVC 0.20 – 0.40 mm |
|
Reel Dia. |
Alu. 440 mm | PVC 440 mm |
| Sealing Foil Width | 150 mm |
150 mm |
|
Sealing Foil Thick |
0.02 – 0.04 mm | 0.02 – 0.04 mm |
| Sealing Foil Dia. | 210 mm |
210 mm |
|
Pack Length |
140 mm | 140 mm |
| Pack Width | 100 mm |
100 mm |
|
Forming Depth |
12 mm | 12 mm |
| Cycle Speed/Output | Up to 30 Cycles/Minute |
Up to 30 Cycles/Minute |
|
Overall Dimensions (Approx.)
|
Length: 3000mm approx. | Length: 3000mm approx. |
| Width: 950mm approx. |
Width: 950mm approx. |
|
|
|
Height: 1700mm approx. | Height: 1700mm approx. |
| Net Weight (Approx.) | 1050 Kgs. approx. |
1050 Kgs. approx. |
|
Utilities Requirement |
||
| Compressed Air |
24 CFM dry air at @ Pressure of 8 Kg/Cm2 |
|
|
Water Cooler |
80 Liters / Hour Inlet pressure = 2.5 bar (Max) | |
|
Water outlet Temp. = 15 ± 2° C |
||
|
Connected Load |
4.5 K.W. | |
| Electrical Power |
415 V ± 10%, 3 Phase, AC, 50 Hz ± 2 Hz (4 Wire) |
|
|
Earthing Cable |
Copper, 2.5 mm² (Minimum) |
* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.
Send Inquiry